The Teak Wood Stain LTK500 is a tinted decorative finish designed to give interior wood the warm appearance associated with natural teak. Its golden-brown tones are ideal for warming up light-coloured wood and adding character to furniture, beams, panelling, woodwork and other decorative wooden features. This wood stain adds colour without hiding the natural grain and is available in a matt or gloss finish. Applied in 1 to 3 coats, it allows the depth of the Teak shade to be gradually adjusted according to the wood and the desired result. Coverage is approximately 10 m²/L.
Benefits of Teak Wood Stain LTK500
Creates a warm Teak shade with golden-brown tones.
Changes the colour of the wood while keeping its natural grain visible.
Available in a choice of matt or gloss finish.
Specifically developed for interior wood surfaces.
Suitable for furniture, beams, woodwork, panelling and decorative wooden features.
Ideal for bringing warmth and character to light-coloured woods.
Colour intensity can be adjusted by applying 1 to 3 coats.
Fast drying: approximately 2 to 4 hours between coats.
Fully dry after approximately 24 hours.
Coverage of approximately 10 m² per litre.
The matt finish creates a more natural appearance with minimal reflections.
The gloss finish enhances the warmth of the colour and highlights the wood grain.
How to Apply Teak Wood Stain LTK500
Preparing the wood before application
Before application, make sure the wood is dry, clean and completely free from dust.
Remove any old finishes that are damaged or incompatible with the application of a new wood stain.
Sand the surface where necessary to obtain an even substrate capable of absorbing the colour consistently.
After sanding, carefully remove all dust from the wood.
For old furniture or dirty wood, clean and prepare the surface appropriately before applying the stain.
Applying the Teak shade
Stir the Teak Wood Stain LTK500 thoroughly before use to ensure an even colour.
Apply the stain evenly, working in the direction of the wood grain.
Begin with one coat, then gradually increase the colour intensity with a second or third coat if required.
Work continuously across each section to minimise visible overlaps and application marks.
Avoid applying excessive amounts of product, as even coats help produce a more consistent finish.
Stir the stain regularly during application to keep the pigments evenly distributed.
LTK500 is intended exclusively for interior wood applications.
Drying time
Allow approximately 2 to 4 hours of drying time between coats.
Before applying another coat, make sure the previous layer is sufficiently dry.
After the final application, allow approximately 24 hours for complete drying.
During this period, avoid unnecessary handling, rubbing or contact with the freshly treated surface.
Matt or Gloss Teak Wood Stain: Which Finish Should You Choose?
Matt Teak Wood Stain: a warm, natural appearance
The Matt Teak Wood Stain LTK500 emphasises the warmth of the colour while reducing reflections from the surface. It is particularly suitable when you want to retain a natural wood appearance while introducing a richer golden-brown tone.
On furniture, beams or panelling, the matt finish creates a subtle appearance that works particularly well with natural, contemporary, exotic or Scandinavian-inspired interiors.
Gloss Teak Wood Stain: a brighter, richer finish
The Gloss Teak Wood Stain LTK500 reflects more light and visually enhances the richness of the colour. It brings greater depth to the golden-brown tones while making the natural patterns of the wood more prominent.
This finish is particularly suitable for furniture or decorative woodwork that you want to make a stronger feature within a room. The final appearance will nevertheless vary according to the wood species, its original colour and its absorbency.
How Many Coats of Teak Wood Stain Should You Apply?
The Teak Wood Stain LTK500 can be applied in 1 to 3 coats. Building the finish gradually makes it easier to control the colour and adjust the depth of the Teak shade to suit your project.
1 coat introduces a warm tone while allowing much of the wood's original colour to remain visible.
2 coats strengthen the golden-brown tones and create a more noticeable Teak effect.
3 coats can produce a deeper, richer colour where the wood allows.
Always allow 2 to 4 hours between coats.
The final shade is not determined by the number of coats alone. The species, porosity and original colour of the wood all have a direct influence on the finished appearance. Very light wood will react differently from a naturally darker species. We therefore recommend carrying out a test before treating the entire surface.
How to Maintain Wood Finished with Teak Wood Stain LTK500
Cleaning stained interior wood
Dust the surface regularly using a soft cloth.
For marks or dirt, use a gentle cleaning method suitable for finished wood surfaces.
Avoid abrasive sponges and aggressive cleaning products that could alter the matt or gloss appearance of the finish.
Refreshing a Teak finish
If the surface begins to show signs of wear, clean it first to accurately assess the condition of the existing finish.
Prepare the wood appropriately before applying another coat of Teak Wood Stain LTK500.
For localised touch-ups, carry out a test beforehand to make sure the new application blends correctly with the existing colour.
Precautions for Achieving an Even Teak Finish
A tinted wood stain allows the underlying wood to influence the final appearance. Following a few simple precautions will help you achieve a more consistent result with Teak Wood Stain LTK500:
Do not apply the stain to damp, dirty or poorly prepared wood.
Stir the product thoroughly before and during application.
Test the colour on an inconspicuous area or an offcut of the same wood before treating the entire surface.
Remember that the original colour of the wood will directly influence the final Teak shade.
Apply the product evenly and avoid excessive build-up in individual areas.
Allow 2 to 4 hours of drying time between coats.
After the final coat, allow approximately 24 hours for complete drying.
Do not immediately cover or place objects on the freshly treated surface.
Allow the stain to dry before making a final assessment of the colour.
Important: Teak Wood Stain LTK500 is intended for interior wood only. For decking, cladding, fences, shutters, garden buildings and other wooden structures directly exposed to the weather, use a product specifically designed for exterior wood.
Professional Tips for Achieving a Beautiful Teak Colour
Test the colour first: the finished shade will vary according to the wood species, grain, porosity and natural colour.
Build the colour gradually: start with one coat and assess the dry result before deciding whether a second or third coat is required.
Keep the product evenly mixed: stir the stain regularly to maintain a consistent colour throughout the application.
Follow the wood grain: apply and finish each stroke in the direction of the grain to help achieve a natural-looking result.
Choose the right sheen: select matt for a more natural, understated appearance or gloss to enhance the richness and depth of the Teak colour.
How to Give Wooden Furniture a Teak Effect
Furniture does not need to be made from genuine teak to achieve an appearance inspired by this distinctive wood species. Teak Wood Stain LTK500 can give a variety of interior woods a warm golden-brown colour while keeping their natural grain and individual characteristics visible.
It is particularly useful for transforming a sideboard, chest of drawers, bookcase, table or older piece of furniture when the original wood looks too pale or lacks visual warmth. Unlike an opaque paint, the stain does not completely hide the material beneath a uniform layer of colour.
The original wood therefore remains an important part of the finished appearance. Its grain, natural patterns and variations remain visible through the colour. By adjusting the number of coats, you can achieve anything from a subtle warming effect to a much richer Teak-inspired finish.
Using Teak Tones to Create a Warm Interior
Teak-inspired colours are popular in interior design for their balance of warm brown and golden tones. They introduce a strong natural wood presence without necessarily creating the very dark appearance associated with deeper brown stains.
The Teak Wood Stain LTK500 can be applied to exposed wooden beams to emphasise their architectural character, to wood panelling to create a warmer atmosphere, or to wooden furniture to provide contrast against lighter walls, fabrics and decorative elements.
Teak tones work particularly well with natural materials and neutral colours, making them suitable for contemporary, exotic, natural and vintage-inspired interiors. The matt version creates a more understated appearance, while the gloss finish gives greater prominence to the colour and natural variations in the wood.
With coverage of approximately 10 m²/L, a drying time of 2 to 4 hours between coats and the option of applying 1 to 3 coats, LTK500 is suitable for everything from small furniture makeovers to larger interior woodwork projects.
Teak Wood Stain or Brown Wood Paint: Which Should You Choose?
Brown wood paint is generally the better choice when you want an opaque, relatively uniform colour. It largely covers the original shade, grain and natural variations of the wood.
Teak wood stain serves a different purpose. It changes the colour of the wood by introducing warm golden-brown tones while allowing its natural grain to remain visible. The finished appearance therefore retains more of the character of the original material.
The Teak Wood Stain LTK500 is therefore particularly suitable when you want to combine a warm decorative colour, wood protection and visible natural grain. It transforms the appearance of interior wood without completely concealing its original character.
