Wood treatment - Natural Colourless Insecticide HM16 Wood Bliss
HM16 Wood Bliss natural colourless insecticide is a colourless preventive and curative wood treatment for all interior woodwork: furniture, parquet floors, frames, wooden works of art, musical instruments. It helps to get rid of woodborers of the Anobiidae family (including the furniture beetle). It allows the wood to be treated without staining it. Available in 0.5, 1, 5 or 20L.
HM16 Wood Bliss Natural Colourless Insecticide is a natural wood treatment product, which can be diluted with water and is made from renewable plant raw materials. It can be used to treat wooden floors or wooden furniture and to eliminate wood borers. Up to the depth of penetration and thanks to its crystallisation effect, HM16 removes from the wood the nutrients sought by harmful insects, fungi and parasites already present in the wood. Living conditions are changed in such a way that their growth is hindered. Contains no toxicologically questionable components. The application of the HM16 insecticide wood treatment therefore avoids the use of pesticides, insecticides and other toxic substances. It can be used in protected natural areas. Made from plant materials, HM16 is an odourless wood insecticide.
Note : After prolonged opening of the canister, mould may form on the surface of the product; this phenomenon is biological proof that the product is free of any usual preservatives during its manufacture. This layer of mould can be easily removed. It can then be used normally.
ADVANTAGES OF THE NATURAL COLOURLESS INSECTICIDE HM16
-
Wood treatment without biocide
-
Does not colour the wood
-
Neutral plant odour (during and after application)
-
Wood surface finishing (the natural structure of the wood is preserved).
-
Restoration (stabilisation) of damaged old woods
-
Increasing effectiveness of insecticide over time
-
No toxic substances released (application in closed rooms possible)
-
Can be used in premises occupied by people with allergies or asthma, young children or those suffering from false croup (laryngeal spasm) or other illnesses.
-
100% biodegradable. No special precautionary measures are necessary during preparation, application or disposal of the product.
-
Food neutral. Even in the case of direct contact with foodstuffs, there is no risk of poisoning.
-
No harm to bees. There is therefore no risk to these extremely fragile beneficial insects.
-
Reduces the risk of fire (up to the depth of penetration)
-
Allows the diffusion and therefore the essential exchanges of humidity.
-
Does not flake and can, if necessary, be post-treated.
GUIDE TO NATURAL COLOURLESS INSECTICIDE HM16
Precautions
-
Protect metal surfaces, glass, natural stone, aluminium, lacquered surfaces...
-
In case of splashes, rinse immediately with plenty of water.
PREPARE THE WOOD
-
The substrate must be absorbent and healthy: clean, dry, non-greasy and properly dusted (especially iron particles).
-
Remove all water- and dirt-repellent substances, old paints, waxes and varnishes. When sanding, avoid the use of iron straw or sanding paper containing iron particles (black paper).
PRECAUTIONS OF USE
-
Do not spill HM16 Natural Colorless Insecticide in a metal container. Avoid the use of metal tools during application.
-
Do not apply below 5°C (41F).
USE OF THE NATURAL COLOURLESS INSECTICIDE HM16
-
Shake the wood bliss HM16 before and during use.
-
Apply at intervals of 12 hours in two applications by brush, roller, immersion, injection, autoclave or spray.
-
Do not glue treated pieces of wood together.
-
For heavily damaged wood (old furniture), the application of the natural insecticide HM16 can be repeated several times to restore and stabilise the wood.
-
As a rule, the natural insecticide HM16 wood bliss does not colour the wood and gives a satin surface. Suitable for use as a parquet insecticide. Test beforehand.
Features
- Use
- Indoor
- Application support
- All supports
- Types of wood
- All kinds
- Ready-to-Use
- Yes
- Number of coats
- 2 layers
- Coverage
- 10 to 15 m²/L per coat
- Drying time
- 12 to 24 hours between coats
- Necessary Tools
- Spalter, Brush, Sprayer
- Cleaning of tools
- Water
- Useful for...
- Treat wood against insects
- Conservation
- Cool, frost-free and light-proof location
- Function
- Treat
Customers who bought this product also bought:
Accessories