Natural Insecticide Treatment - Wood Bliss - Non Toxic - VOC Free

Wood Bliss®, like the Indian Patina, is a natural, non-toxic treatment for attacked wood. It does not contain any dubious toxicological components (confirmed by the Zörner engineering office and the Lafu laboratory: chemical and microbiological analysis working for independent and neutral companies).

Wood Bliss® does not threaten health and does not degrade the environment. It contains no insecticides or biocides. Suitable for indoor use, it preserves air quality without risk to health.

Ten-year efficiency guarantee.

Wood Bliss® does not emit any volatile organic compounds except water. It has been designed according to a worldwide patented process. We insist that the action of Wood Bliss® does not diminish over time, on the contrary, it increases. Wood Bliss® is a natural wood treatment recommended by ÖKO-TEST.

Wood treated with Wood Bliss® is physically modified in such a way that wood-eating insects and wood-eating fungi no longer recognise the wood as a source of nutrients (starch, mineral salts, lignin). Wood that has become unsuitable hinders their development, so that harmful wood pests do not survive. With this process, Wood Bliss® is a natural insecticide for wood.  

ADVANTAGES OF A WOOD BLISS TREATMENT

PREVENTIVE TREATMENT

• Protects against xylophagous insect attacks

• Protects wood from termites

• Protects the wood from lignicultural and lignivorous fungi.

CURATIVE TREATMENT

• Neutralises the evolution of wood-eating insects

• Neutralises the evolution of termites

• Safeguards attacked woods from lignicultural and lignivorous fungi.

WOOD CONSOLIDATION IN BUILDING RENOVATION

• Reinforces cracked wood

• Restructure the mass of wood lost (due to pest gnawing) by petrifaction.

• Avoids expensive renovation techniques

• Decrease in the combustibility of wood and smoke emanation

WOOD BLISS GUIDE/span>

FIELDS OF APPLICATION

• All categories of wood: frameworks, frames, beams...

• All types of wood outdoors (in this case, protection against moisture is required, such as wood stains).

• Masonry

• The food sector

• The environment of children, infants and people with illnesses or allergies, where non-toxic wood treatment is required.

• The environment of the animals (stables, cowsheds, beehives, kennels, cages, aviaries...) which requires a natural treatment of the wood.

• Not suitable for parquet floors, frames and furniture

PRECAUTIONS

• Wear gloves and protect your eyes.

• Protect metal and glass surfaces (windows, glasses, etc.), natural stone, aluminium, lacquered surfaces, floors, etc. In the event of splashes, rinse immediately with plenty of water. In case of splashes, rinse immediately with plenty of water.

   

PREPARE THE WOOD

• The surface must be absorbent, clean, dry, non-greasy, brushed and dust-free. Remove all crumbly and worm-eaten parts, sawdust, water-repellent or dirt-repellent substances, old paints, waxes and varnishes that prevent Wood Bliss® from penetrating.

• Wood with a temperature below 3 °C (37,4F) cannot be treated

• Do not superimpose the treated pieces of wood: they will stick together.

USE OF WOOD BLISS (INDIAN PATINA)

• Shake the product before and during use. Wear gloves and protect your eyes (also protect eye glasses from splashes).

• Apply at 12-hour intervals in two applications with a brush, by spraying or dipping, and by injecting into the galleries. It is essential that Wood Bliss® reaches the infested areas.

• Impregnate all wood surfaces, including cuts (no planing after treatment). Do not leave excess Wood Bliss® on horizontal surfaces. Outdoors, protection against moisture is required (woodstains).

• After treatment, a slight whitish layer may appear. This is a sign of the effectiveness of the product (crystallisation). For wood exposed to view: remove the crystalline layer. Wood Bliss is equivalent to the Indian Patina.
  

DRYING

• Complete after 48 hours (before finishing coats) - 12 to 16 hours between coats.  

TIPS

• Due to its strong alkalinity, a more or less important change of colour is observed (oak, chestnut...). Make preliminary tests!
  
• For a colourless treatment, try the natural colourless insecticide HM1.

 Composition

• Vegetable raw materials (65%) and renewable minerals (35%). Contains neither insecticides nor biocides.

• Abietic acid, potassium carbonate, silicate solution, cellulose, water, silicic acid, xylose.