Polyurethane Clear, Gloss or Matte Furniture Varnish VM500
Furniture Varnish VM500 is a water-based polyurethane clear varnish for wooden furniture, cupboards and tables. Intended for the protection of interior wooden furniture, Furniture Varnish VM500 is a clear polyurethane wood varnish that effectively protects your wood from stains, water and scratches. Available in 1, 2, 5L, in Matte or Gloss finish.
Furniture Varnish VM500 is ideal for protecting and waterproofing wooden furniture and objects. Clear and transparent, this polyurethane varnish for wood offers effective protection against everyday aggressions such as scratches, household stains (grease, coffee) and the use of cleaning products. This varnish for wooden furniture provides a delicate finish, embellishing the grain of the wood and adapting to all wood species. Resistant to wear, shocks and scratches, it protects the wood surface while enhancing the nature of the wood. Daily maintenance is easy, as a simple sponge stroke is enough to remove all traces of dirt.
This polyurethane varnish keeps the original wood longer thanks to its protective effect. In a matt clear version, this varnish keeps the natural appearance of the wood intact. Very suitable for the protection of wooden tables.
BENEFITS
- Colourless wood varnish
- Ease of use
- Colourless / Transparent
- Easy daily maintenance
- Non-yellowing
- Matte or glossy aspect
- Long-term protection
- Air quality A+
- Anti-stains
- Resistance to humidity and water
- Safe for your health and your interior environment
- Quick Drying
- Values the nature of the wood
INSTRUCTIONS FOR THE USE OF VARNISH FOR WOODEN FURNITURE
PREPARE THE FURNITURE
- The wood must be clean, dry (humidity < 10%), dust-free and without traces of old finishes.
- If necessary, strip or sand down to the raw wood. Dust carefully.
VARNISH APPLICATION
- Ready-to-use product, shake well before applying the varnish.
- Apply the varnish in the direction of the wood grain using a brush, spalter or roller (short bristles) in 2 to 3 regular, filled coats (3 coats for highly use furniture).
Drying
- Leave to dry for a minimum of 2 hours between each coat of soft varnish, without exceeding 24 hours.
- A light sanding with fine abrasive paper (120 grit) after the first coat removes small roughnesses from the wood.
- Dust carefully before applying the next coat of varnish.
- Complete hardening is achieved after a few days, take care during the first few days.
PRECAUTIONS AFTER VARNISH APPLICATION
Complete hardening is reached after a few days, it is important to take a few precautions during the first few days:
- Do not cover the furniture.
- Do not place any objects on the freshly varnished furniture.
- Do not use impregnated textiles to remove dust.
TIPS
- To test the final result, first test the Furniture Varnish VM500 on a drop or an inconspicuous area. To get an idea, you can consult the photo gallery of the furniture varnish VM500
- We advise you to choose a matt finish to keep the original appearance of the wood.
- On tannic and exotic woods, prepare the piece of furniture with the Anti-Tanins Primer PAT400.
- For other types of wood, prepare the piece of furniture with the Pore Filler Primer BP400.
MAINTAINING AND RENOVATING WOODEN FURNITURE
FURNITURE MAINTENANCE
- Routine maintenance can be done with a damp sponge and a black soap such as Anova Bois Black Soap SN800.
RENOVATE THE FURNITURE
- After a light sanding of the surface, apply the varnish in one coat to the furniture subject to the most stress.
Professional Guides
How to relook and customise a wooden piece of furniture?
Follow our guide How to restyle and customise a wooden piece of furniture to know exactly how to personalise your furniture.
How to renovate an old wooden piece of furniture ?
Do you own an old wooden piece of furniture and want to renovate it ? You can discover our guide here and you will be directed on how to proceed.
Polyurethane varnishes are protective varnishes for wood, usually resin-based. The one designed by Anova Bois is water-based. These varnishes are most often applied to rough wooden furniture in order to protect it from domestic aggression. This protection increases their lifespan. They can also bring an aesthetic appearance thanks to their finish or colour. The furniture varnish that we offer is available in gloss finish, for a resplendent decorative effect, or in matt and colourless finish, to come as close as possible to the touch and the original colour of the wooden furniture. In addition to their healthy appearance for indoor use because they are odourless and free of VOC emissions, the furniture varnish we offer has a double advantage: it waterproofs the wood permanently and dries quickly, so your wooden furniture and objects will be protected quickly and effectively. Finally, this varnish meets the EN 71-3 toy standard, which certifies that no migration of dangerous substances occurs if the dry product comes into contact with the mucous membranes (sucking, licking, ingestion, prolonged contact, etc.). The varnish can therefore be safely applied to wooden toys or children's furniture.
Features
- Use
- Indoor
- Application support
- Furniture
- Types of wood
- All kinds
- Available Colours
- Colourless
- Finish
- Satin-matt, glossy
- Ready-to-Use
- Yes
- Number of coats
- 1 to 2 coats
- Coverage
- 10 to 15 m²/L per coat
- Drying time
- 2 hours
- Necessary Tools
- Brush, Spalter (wide brush) or roller
- Cleaning of tools
- Water
- Appearance
- Fluid
- Product Composition
- Polyurethane resin in aqueous phase
- Useful for...
- Protect from household usage, maintain a beautiful natural look and make maintenance easier
- Maintenance
- Washable
- Function
- Varnish
Excellent produit. Le vernis respect totalement la couleur naturelle du bois. Je l’utilise pour protéger des jeux enfants et efficacité parfaite. Protège bien des éventuelles rayures. Je recommande ce produit et n’hésiterais pas à recommander cette marque
Commandé pour une table chêne Me conviens parfaitement, très facile à appliquer et très beau rendu ! Passé fond dur avant acheté sur même site
Une application très agréable, une bonne qualité de protection et un rendu mat incolore qui porte bien son nom! Le VM500 est devenu un vernis indispensable à avoir dans mon atelier.
Je souhaitais obtenir une finition naturelle pour des étagères en chêne d'une bibliothèque. Le vernis VM500 mat a pleinement rempli son rôle : en plus d'une application facile, la teinte naturelle du bois a été respectée (tout au plus un très léger aspect plus foncé) contrairement à d'autres vernis dits "incolores" vendus dans les magasins de bricolage. Je suis très satisfait ! Et bravo pour la rapidité de livraison (un jour !) ainsi que pour les conseils au téléphone !
J'avais fait plusieurs essais avec d'autres produits du commerce et je désespère. Ce produit m'a donné un résultat parfait, très naturel. Je recommande
Quand l'équipe Anovabois m'a présenté le produit au téléphone, j'étais septique sur le point "Incolore". En effet, certain vernis dit « incolore » donnent un effet mouillé au bois après application, sur les bois clairs, ça se traduit par un jaunissement qui dénature complétement le bois. Sur du Frêne, après séchage le vernis est relativement discret, il ne dénature pas la teinte naturelle du bois. L’effet satin est relativement plaisant au regard et au touché. Pour le séchage, c’est appréciable d’avoir un produit qui ne demande pas 6h à la première couche. Dans un atelier à bonne température, il se fait vite et bien. De quoi enchainer les égrainages et les couches assez rapidement. Au pinceau le produit tire bien si on n’y va avec parcimonie sur la quantité de produit. Bref de septique je suis passé à convaincu et c’est une finition que je vais pouvoir proposer sans soucis à mes clients.
Excellent produit, beau rendu, facile à appliquer, de plus, une des rares marques à faire du mat en vernis. Je recommande vivement ce produit ainsi que la qualité de "Anova bois".
j'ai appliqué ce produit sur ma table en bois il y a 1 mois, le rendu est bon et l'application du vernis était assez facile.
Customers who bought this product also bought:
Beam and carpentry wood stain LPC500 - All Woods (Oak, Douglas, ...)
Wood treatment - Natural Colourless Insecticide HM16 Wood Bliss
Accessories
Reçu très rapidement. Appliqué sur table en chêne brut. Application très facile. Pas de reprise au séchage. Sèche rapidement. Tendu parfait. Bien mat. Et ne modifie pas la teinte. Rendu très naturel.