Exterior Wood Paint PBE900 - Ral Wood Paint

The Exterior Wood Paint PBE900 can be used to protect and decorate all types of exterior wood. With a satin finish, this tinted paint for exterior wood offers excellent protection against UV rays, water, run-off and rubbing. This paint can be used on both old and new wood. Microporous and water-repellent, it waterproofs the wood while allowing it to breathe. The wood can then evacuate its natural moisture, which eliminates the risk of blistering or flaking.

It is very suitable for painting wooden shutters or for painting wooden cladding, for example.

Formulated in aqueous phase, this coloured paint for exterior wood is safe for the environment and for the applicator.

This product is available in a wide range of colours according to the ral colour chart. The ral wood paints allow you to find exactly the colour of your choice.

If you would like a white paint, please consult our Exterior Wood White Paint BLE900.

• Suitable for all types of outdoor wood

• Professional quality

• Microporous, it allows the wood to breathe.

• Water-repellent, it waterproofs the wood.

• High weather resistance

• Odourless, neutral for the environment and the applicator

• Limits the risk of wood blistering or chipping

• Protects against ultraviolet rays

• More than 200 shades of tints to find the right paint colour for you

 HOW TO USE EXTERIOR WOOD PAINT PBE900

PREPARE THE WOOD

• Apply to clean, dry, healthy, dust-free and perfectly adherent wood.

• Wash or sand old, well-adhered paints.

• Strip off chalky, flaky or poorly adhering paint.

• Avoid applying wood paint to wood with a moisture content of more than 17% or a pH value of more than 11.

 APPLICATION OF EXTERIOR WOOD PAINT PBE900

• This wood paint can be applied with a brush, roller or spray gun. When spraying, add 2-3% water. If you use an airless spray gun, we generally recommend nozzles 417,517 and 617. To find out more, you can read our article on the choice of nozzles for airless spray guns.

• On bare wood: first coat diluted 5 to 10%, second coat diluted 0 to 5%, third coat undiluted. Dilution solvent: water.

• On printed wood (having received an undercoat): first coat diluted from 0 to 5%, second coat undiluted.

• Maintenance: one undiluted coat.

 DRYING

• Allow to dry. Touch dry in 1 hour. Dry in 4 hours (with T° = 20°C (68F) and RH = 70%). The paint can be recoated after 4 to 12 hours.

 PRECAUTIONS BEFORE APPLYING PAINT

Exterior Wood Paint PBE900 does not require the application of an undercoat. However, the application of an undercoat is recommended for new woods known as fatty, acid, resinous or tannic.

• For tannic and exotic woods (fatty, acidic), it is recommended to use as an undercoat the Anti-Tanins Primer PAT400

• For other woods (new, porous), it is possible to apply an undercoat by diluting Exterior Wood Paint PBE900 with 20% water.