Special Primer for Parquet PSP400 - Wooden Floor Primer

Special Parquet Primer PSP400, or Hard Base is a pore filler primer that is essential for preparing a parquet floor before finishing. The Special Parquet Primer PSP400 blocks the support and promotes the adhesion of the parquet sealer. It significantly improves resistance to stains and water by penetrating deeply into the wood. Available in 1, 2, 5 and 10L..

More Information.

Diagnostic
Complet

50,70 € tax incl.

In Stock - Shipped within 48H

The Special Parquet Primer PS400 is a pore-filling hard primer for parquet and stairs to prepare the wood before finishing. It improves stain resistance and adhesion while maintaining the natural appearance of the wood. The Special Parquet Primer emphasises the noble grain of the wood. The pore-filling primers increase protection against domestic stains and water.

 

BENEFITSBENEFITS

  • Preserves the natural appearance of the wood

  • Penetrates in depth

  • Blocks the support

  • Reinforces the adhesion of parquet varnish (glazer)

  • Hardens wood fibres

  • Reinforces protection from domestic stains and water

  • Quick drying

  • High application comfort

  • Air quality A+

  • Odourless and Colourless

 

INSTRUCTIONS FOR USE OF THE SPECIAL PARQUET PRIMERINSTRUCTIONS FOR USE OF THE SPECIAL PARQUET PRIMER

PREPARE THE WOOD

  • The wood must be clean, dry, dust-free and without traces of old finishes.

  • On old parquet: remove all traces of old finishes, clean, strip or sand down to the raw wood. Dust carefully.

  • On new parquet: ready to use.

 

APPLICATION OF THE SPECIAL PARQUET PRIMER

  • Ready-to-use product, shake the primer well before application.

  • Ideal conditions: Temperature between 12°C (53,6 F) and 25°C (77F), dry and draught-free weather.

  • Apply the parquet primer to a clean, dry and smooth surface using a spalter, brush or roller (short bristles) in the direction of the wood grain.

 

DRYING

  • Allow the special parquet primer to dry for at least 2 hours.

  • Dry to the touch in 1 hour.

  • Ginnable / Recoverable in a minimum of 2 hours.

 

FINISHING AFTER APPLICATION OF SPECIAL PRIMER FOR PARQUET

  • Grit (light sanding) the surface with fine sandpaper (120 grit) to smooth the surface. Dust carefully.

  • Cover with a finish suitable for interior wood such as the Vitrificateur Parquet VP500

 

TIPS TIPS

  • To assess the final result, first test the Special parquet primer on a drop or an inconspicuous area.

 

GUIDE FOR VARNISHING YOUR FLOOR

Do you have a question about the sealing of parquet floors? Don't worry and follow our guide to parquet floors and their protection.

FunctionPrepare
UseIndoor
Application supportWooden flooring
Types of woodAll kinds
Available ColoursColourless
FinishMatt
Ready-to-UseYes
Coverage10 to 15 m²/L per coat
Drying time2 hours
Necessary ToolsBrush, Spalter (wide brush) or roller
Cleaning of toolsWater
AppearanceFluid
Product CompositionAcrylic resin in aqueous phase
Useful for...Prepare before application
Avis des clients concernant ce produit
Grade 
2018-06-21

Bonne sous couche

Ce produit accentue l'effet du vitrificateur.
Cette sous couche fait le travail.

    Write your review!

    Write a review

    Special Primer for Parquet PSP400 - Wooden Floor Primer

    Special Primer for Parquet PSP400 - Wooden Floor Primer

    Special Parquet Primer PSP400, or Hard Base is a pore filler primer that is essential for preparing a parquet floor before finishing. The Special Parquet Primer PSP400 blocks the support and promotes the adhesion of the parquet sealer. It significantly improves resistance to stains and water by penetrating deeply into the wood. Available in 1, 2, 5 and 10L..

    More Information.