White Interior Wood Paint BLI900 - Painting Woodwork And Furniture

White Interior Wood Paint BLI900 with a satin finish allows you to protect interior woods (furniture, panelled walls, chairs, panelling...) while staining them white. It offers excellent protection against shocks, stains and rubbing. With its strong covering power, it masks slight defects appearing on the wood. This white lacquered wood paint offers a smooth, relief-free finish (lustrous satin finish). It can be washed, making it easier to maintain your interior woodwork.

This paint can be used on new wood or on wood already painted in renovation. It allows you to paint the woodwork in white to bring a decorative touch to your wood while protecting it from external aggressions (water, stains, rubbing, deformation...).

This white paint for woodwork (and other interior wood surfaces) is safe for the environment and the applicator (water-based formulation). Odourless when dry, the interior air quality is A+ after application of the paint.

If you would like a coloured paint, please consult our Interior Wood Paint PBI900.

 BENEFITS OF WHITE INTERIOR WOOD PAINT BLI900  

• Suitable for all types of interior wood: furniture, panelling, woodwork..

• Satin white paint for wood

• Resistance to water, stains and rubbing

• Microporous

• High coverage

• Odourless

 INSTRUCTIONS FOR USING WHITE PAINT FOR WOODWORK

PREPARE THE WOOD

• Apply to clean, dry, undamaged, dust-free and perfectly well bonding wood.

• On raw wood: grit the surface with 100 or 120 grit sandpaper. Dust carefully

• On tannic or exotic woods (oak, chestnut...) or exotic woods (merbau, iroko, ipe, teak...): apply a suitable undercoat such as the Anti-Tanins Primer PAT400. For other woods (new, porous), it is possible to apply an undercoat by diluting White Interior Wood Paint BLI900 with 20% water.

• On painted, varnished or stained wood, on melamine or laminate, on medium: Sand the surface with 100 or 120 grit sandpaper. Dust carefully. Degrease carefully with a cloth soaked in methylated spirits or acetone.

• On oiled or waxed wood: sand with grit 40, 60 then 100, remove dust, then degrease carefully with Wood Cleaner N100 or with a cloth soaked in alcohol or acetone.

APPLICATION OF WHITE INTERIOR WOOD PAINT BLI900

• Mix the white paint for interior wood well before use for a good dispersion of the pigments.

• Apply one coat crosswise using a brush or a lacquer roller. Leave to dry for 2 to 8 hours and then apply a second coat in the same way. Do not exceed 48 hours between coats.

DRYING

• Fast hardening after 24 hours drying. Take a few precautions during the first days (shocks, stains, cleaning...). 

PRECAUTIONS FOR USE

• Avoid applying lacquer paint and woodwork on wood with a moisture content of more than 17% or a pH of more than 11.

• Do not apply the paint when the temperature is below 10°C (50F) or above 35°C (95F).